Refinaria de

Refinaria de é principalmente aplicável a UMA variedade de viscosidade, não - viscoso corrosivos e não corrosivos, líquidos do sistema de detecção fotoelétrica. Refinaria de adota alemão produtos com qualidade de confiança. Refinaria de dualrate regulamento e vácuo absorção do sistema são adoptadas para evitar overflowing.Refinaria de podem fazer com que o problema poderia ser descoberto e resolvido EM tempo.

edible oil refinery plant for edible oil refining plant machine produced and supplied by Shandong Microwave Machinery Co.,Ltd.
Small oil machine includes a series processing procedures as degumming, neutralization, bleaching, deodorization and winterisation. In general there are two methods of edible oil refinery plant for edible oil refining plant machine, one is physical refining and the other is chemical refining by edible oil refinery plant for edible oil refining plant machine. However, no matter what kinds of reining methods, edible oil refinery plant for edible oil refining plant machineare all done with the help of various oil processing equipment and machinery, and Small oil machine are Small oil machine used to refine almost all kinds of oil extracted from oil seeds like sunflower seeds, peanuts , sesame seeds, and soya bean seeds etc.
Main Steps of edible oil refinery plant for edible oil refining plant machine
1. Crude Oil Degumming of edible oil refinery plant for edible oil refining plant machine: In this step gums in crude oil are removed by hydration with the help of phosphoric acid.
2. Neutralization of Small oil machine: In this step free fatty acids are neutralized by Small oil machine using sodium hydroxide and convert them into soap. Additional impurities are also removed by LDorption on soap.
3. Bleaching of Small oil machine: During bleaching, unwanted pigments are LDorbed physically and oil will become much clearer.
4. Deodorization of edible oil refinery plant for edible oil refining plant machine: Deodorization is used to remove unacceptable odors by steam distillation, the odoriferous compound are stripped off with the help of live injected steam into heated oil under high vacuum pressure.
5. Dewaxing (necessary for cold areas) of edible oil refinery plant for edible oil refining plant machine
Some kinds of oil like sunflower, maize germ or corn oil have waxes inside, if these impurities are not removed by edible oil refinery plant for edible oil refining plant machine, the oil will freeze easily under low temperature, thus effecting oil quality and appearance. so edible oil refinery plant for edible oil refining plant machine is necessary in extremely cold areas.

edible oil refinery plant

Edible Oil Refinery Plant Process Introduction

Alkali hot water

Crude oil→filter→mix→reactor→mix→reactor→centrifugal separation→oil residue

↑ ↓

Phosphoric acid hot water→mix ↓

↓

degumming oil←cooler←dry←centrifuge separation←mix←alkali liquor

↓ ↓

↓ vacuum steam jet pump←steam citric acid

↓ ↓

bleaching earth→mix→decoloring→filter→decoloring oil→mix→heat

↓

refined oil←filter←cool←deodorizing←vacuum

Edible Oil Refinery Plant Main Processes Introduction

Main Refining Processes:

De-mixed, degumming, dehydration, deacidification, decolorzation, dewaxing and deodorization.

1. Degumming :Usded to neutrilizing ,and water washing,to rid off the acid .
2. Deodorization:Used to rid off the fetid smell/odour of oil by steam understand of high temperature.
3. Soap feet vessel:Used to refine the oil sediment from oil refiner,to get some oil from oil sediment .
4. Hot & Alkali water tank:Used to produce hot water heated by the steams ,also alkali water from the alkali dis-voling tank,for adding into the oil refiner.
5. Alkali dis-voling tank :Used to produce the alkali water .
6. Steam separator:Separating the steam to oil refiner,de-colorer,deodorizer,hot water tank,etc.
7. Decoloring vessel:Used to rid off the color of the oil
8. Clay tank:Store the medication decolored for the clay tank.
9. Transfer hot oil furance:Contact to the deodorizer part , producing high temperature (280 degrees orso) for deodorization.
10. Gear pump:Pump oil into kinds of vessel and tank.
12.Water pump:Pump cool water into water tank.
13. Transfer hot oil pump:Pump hot oil into transfer oil furance.
14. Cooling water tower:Cool water for cooling oil ,recycling using.

15. Dewaxing /winterization / fractional

Continuous Decoloring Process Features:

1. The oil fully contacting with the decolorant can improve the decolorization efficiency and reduce the usage of decolorant;

2. The continuous and uniform material flows will balance the decoloring time and avoid the recovery of grease oxidation and acid value.

3. The special mixing structure of decoloring tower won't cLDe the material dead area, which can avoid the LDorbent sedimentation and pipe blockage.

4. The continuous airtight efficient filtration equipment has realized the automation of cake discharge and reduced the labor intensity.

5. The advanced drying technology can reduce the oil content in filter cake.

Continuous Refining Deodorizing Process

The qualified decolored oil enters into the spiral plate heat exchanger to recover most of the heat, and next goes to high pressure steam heat exchanger to be heated to the process temperature (240-260°C) and then enters the deodorization tower. The upper layer of combined deodorization tower is the packing structure which is mainly used to remove the odor producing components such as free fatty acid (FFA); the bottom layer is the plate tower which is mainly for achieving the hot decoloring effect and reducing the peroxide value of the oil to zero. Oil from the deodorization tower enters into the heat exchanger to recover most of the heat and makes further heat exchange with crude oil, and then is cooled to 80-85°C through the cooler. Add the required antioxidant and flavor agent, and then cool the oil below 50°C and store it. Such volatiles as FFA from the deodorizing system are separated by the packing catcher, and the separated liquid is FFA at low temperature (60-75°C). When the liquid level in the temporary tank is too high, the oil will be sent to the FFA storage tank.

Automatic Control System

For its application in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop, with efficient production management. It has reduced the production cost greatly and improved the management efficiency.

Shandong Microwave Machinery Co.,Ltd.is a Small oil machine factory specializing in the production of edible oil refinery plant for edible oil refining plant machine, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Small oil machinecustomers with design and services of 1-2000 tons edible oil refinery plant for edible oil refining plant machine. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Small oil machineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Small oil machineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Small oil machineequipment has been successfully exported to more than ten countries: Russia, LDtralia, India, Afghanistan, Cameroon,and so on.

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: [email protected]

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)

Contact Person: Jayson
Company Name: Jinan Joysun Machinery Co., Ltd.
Telphone: 86-531-82633959 (Working Time)
86-531-15315573781(Nonworking Time)
Company Location: Leader Industrial Park,Jinan,Shandong
Contact Person: [email protected]